TECHNOLOGY UPS + NYLON COATED 

UPS tape, produced with machinery engineering enterely developed and patented by MEDID, it’s 10 times more resistant than normal ones (*)

(*) TEST JIS: UPS-MEDID tapes resist 500 cycles against the 240 of the best placed concurrent, and the 15 to 70 of the majority of brands.

1: Tempered steel base.
2: Surface anchoring treatment.
3: Opaque enamel, polymerized at high temperature.
4: Printing of graduation and numbering.
5: Two coatings transparent enamel, UPS technology deposition.

 

A: Two coatings transparent enamel UPS.

B: Nylon coating.

 


Furthermore, the tapes with UPS coating are:

 
ANTIADHERENT
SLIPPERY COATING
LONG LIFE
NON-REFLECTIVE

 

TAPE PRINTED ON BOTH SIDES, REINFORCED HOOK
AND NON-SKID HOOK

TAPE PRINTED ON BOTH SIDES
Back: vertical scale
Front: horizontal scale

 

REINFORCED HOOK

MORE RESISTANCE
= LONGLASTING
= MORE ACCURACY.

SLIPPERY SLIDING. BIGGER RIVETS.

GRANTED ACCURACY DUE TO THE BETTER GUIDANCE OF THE HOOK.

BETTER HOLDING THANKS TO THE ENLARGED WIDENESS.

 

NON-SKID HOOK

Hook with rubber surface of great hold.

 

LONG TAPES 

STEEL:
 Tempered steel tape, 1 mm scale interval. Steel long tapes are suitable for professional measurements with ACCURACY CLASS II (EEC aproval), less tolerance means HIGHER ACCURACY.
FIBERGLASS:
 Comfortable to use in long distances measurement due to the light
weight, flexibility and longlasting. Washables, non conducting and
resistants to abrasion and tension.
Fiberglass in CLASS II = DOUBLE ACCURACY:
1: Parallel strands of fiberglass.
2: Plastic coating.
3: Transparent coating protects blade graphics, highly resistant to mechanical and chemincal abrasion. Lightweight. Pliable. Virtually stretch-free. Washable. Electrically non-conductive.



TOLERANCE TABLE

ACCURACY

LENGHT/TOLERANCE

1 m

 2 m 3 m 5 m 8 m 10 m 20 m 30 m 50 m 100 m

II

0,5

0,7

0,9

1,3

 1,9 2,3 4,3 6,3 10,3 20,3

III

1,0

 1,4 1,8 2,6 3,8 4,6 8,6 12,6 20,6 40,6





SPANISH STARTING: “0” point at the end of the hook.
CEE STARTING: “0” point on the foldable hook.


LEVELLING

WATER LEVELS: Strong and accurated, the accuracy reach the 0,5 mm/m = 0,0285° to 1 mm/m = 0,057° depending on models. Accuracy 0,5 mm/m (electronically tested) means that a level that is 1 m long allows max. 0,5 mm faults of horizontal line on one or the other side of the level, under the condition, that the bubble in the vial is precisely in the middle of the marking rings.

More resistant thanks to the enlarged thickness of the aluminium profils.

Turned acrylic glass vials, tightly welded to inset, corrosion-proof read-off rings. Its special fluorescent solution is highly resistant to UV radiation and ensures an easlily readable bubble. Its high stability ensures precise readings at temperatures from –20°C to +40°C. The vial unit is located in the level’s body surrounded by materials which give it an absolute protection and stability.


TYPES OF VIALS

For horizontal reading.

For 
vertical reading.

For 45° angle reading.